MGI JETVARNISH 3DS

HØJ PRODUKTIVITET – med single pass-print er JETVARNISH 3DS en Spot UV-lakeringsenhed, der giver høj hastighed og høj produktivitet.
DEN DIGITALE FORDEL – med digitaliseringen af Spot UV-efterbehandlingen kan du tage et par ark fra hvert job og Spot UV-coate dem, så dine kunder kan SE og FØLE den effekt, deres materialer kan have. Med JETVARNISH 3DS kan din kunde 3D Spot UV-coate direkte på digitale print. Udnyt den specialdesignede lakformel kombineret med evnen til præcist at variere tykkelsen af coatingtykkelsen på hvert ark for at tilføre dine digitale print et individuelt og særligt præg. Tykkelsen af lakken kan tilpasses efter kundernes behov, fleksibelt og on-demand. MGI JETVARNISH 3DS er ideel til lukrative små og mellemstore printjobs.
UV INKJET-TEKNOLOGI – den intelligente kombination af MGI's eksklusive inkjet-teknologi med KONICA MINOLTA's Drop-on-Demand piezoelektriske printhoveder sikrer, at du får den kvalitet, du fortjener, fra første til sidste side.
SOFTWAREPAKKE INKLUDERET – JETVARNISH 3DS HubManager giver dig mulighed for at følge dine opgaver, administrere din jobkø, oprette job tickets, genopkalde genoptryk og justere din AIS-scanner med et enkelt og intuitivt værktøj. En effektiv funktion giver dig mulighed for nemt at eksportere alle dine detaljerede produktionsdata om interne omkostninger til analyser og rapporter. Spot Varnish Editor er designet til at redigere dine filer på stedet. Det giver dine kunder den nødvendige fleksibilitet til at tilpasse og ændre deres printjobs på stedet og spare tid og penge. Product Cost Analyzer kan beregne produktionsomkostningerne ned til en tiendedel af en femøre og give kunden præcise oplysninger om forbrugsmaterialer pr. printjob, endda før jobbet er udskrevet.
AIS SmartScanner – JETVARNISH 3DS er udstyret med AIS SmartScanner til automatiseret registrering ark for ark.
LAKÉR OFFSET OG DIGITALE PRINT – med JETVARNISH 3DS kan din kunde spotlakere på toner- eller offset-print med og uden laminering. Det gør din kundes arbejdsgange meget mere fleksible og lette.

Share

Egenskaber

MGI JETVARNISH 3DS

Begræns ikke dig selv til blot flotte printjobs – tiden er inde til at skabe mere værdi og kreativitet for dine kunder. JETVARNISH 3DS forvandler dine printjobs til spektakulære og uimodståelige print, der øjeblikkeligt får din kundes fulde opmærksomhed. Du kan nemt spotcoate alle dine digitale print, fremhæve bestemte områder eller tilføje 3D-effekter, hvilket gør dine printjobs mere levende og håndgribelige. Digitaliseringen af Spot UV-efterbehandlingen giver dig mulighed for at tage et par ark fra hvert job og Spot UV-coate dem, hvilket betyder at du kan producere salgbare prøvetryk, hvor dine kunder kan se, røre og mærke, hvordan deres materiale kan se ud. Med JETVARNISH 3DS som en komplet digital løsning kan du forberede alt dette on-demand og spare tid og penge.

Specifikationer & Downloads

Specifikationer

System Configurations - JETVARNISH 3DS
Printing Technology	MGI’s exclusive inkjet engine technology Drop-on-Demand (DoD) technology Piezoelectric printheads,developed and manufactured by Konica Minolta Single pass printing Flexible & scalable printing architecture
Coating Thicknesses	Depending on your file, the inks used and the type of surface of your sheet, the coating thickness can vary. On laminated and aqueous coating: 21 μm – 232 μm* for 3D raised effects and tactile finish. On toner and coated paper: 30 μm – 116 μm/232* μm for 3D raised effects and a tactile finish
Production speed	In 2D/flat mode: Up to 2,077 A3 sheets per hour (with 21 μm) In 3D/raised mode: Up to 1,468 A3 sheets per hour (with 43 μm) Up to 547 A3 sheets per hour (with 116 micron)
Registration	SmartScanner coupled with Artificial Intelligence (AIS) for fully real-time automated sheet-to-sheet registration process. No crop mark required.
Formats	Min. 21 x 29.7 cm / 8 x 11.8” Max. 36.4 x 102 cm / 14.33 x 40.15” Max. Printable Width 35.3 cm
Substrate Thickness	Min: 135 gsm and not less than 150 μm or 6 mil before printing & lamination Max: 450 gsm and not more than 450 μm or 18 mil before printing & lamination Motorized height-adjustment print heads
Substrates**	Printing on most matte or glossy laminated surfaces, with or without aqueous coating, layered paper, plastic, PVC and other coated materials
Varnish on toner	Spot 3DS coat directly onto most digital prints with no lamination or coating required
UV Coatings and capacity	3D varnish delivered with a 10-litre tank capacity
High Capacity Automatic Feeder	Feeder able to handle a paper pile up to 30 cm 2,500 sheets at 135 gsm
High Pile Output Stacker	Stacker able to handle a paper pile up to 30 cm 2,500 sheets at 135 gsm
Paper Path	100% flat paper path; Vacuum feed system Air feed system; Automatic double sheet detection In-line LED dryer “On-the-fly” drying & curing via integrated LED Spot Coated sheets can be immediately finished or handled, no additional drying time required
Front End System	Dedicated PC; CPU + touch-screen + keyboard/mouse Ethernet connection 10/100/1000 BT (RJ 45) Built-in Application Software Suite Comprehensive job queue management Predictive printing cost calculator (coating consumption) Dedicated image editor to do local and fast image editing prior to production
Maintenance & Remote Technical Support	Daily maintenance completed in less than 10 minutes Majority of procedures are automated Automatic cleaning system From cold start to production in less than 10 minutes Remote troubleshooting & support via included video/ web camera (high speed internet connection required)
Operator Panel	Integrated user-friendly LCD touch-screen
Options	Twin bar option: 2nd print engine to increase 3D print speed and coating thickness, up to 232 μm variable data option. Variable data option: Complete system including RIP, barcode reader and MGI software to automatize the association between a pre-printed barcode and its specific spot coating file
Dimensions (L x W x H) & Weight	4.26 (5.47*) x 1.14 x 1.80 meter (with the longest paper extensions installed) 1 metre clearance required on all 4 sides ± 1,100 kg
Electrical requirements	7.5 kW (32 A) at 220–240 Volts; 2 plug CEE/IP44 32A (1P+N+E)
Operating	Temperature: 18 to 30°C Environment Relative humidity: between 35 – 55% (no condensation)
Respecting the Environment	Eliminates resource waste (wasted electricity,paper and varnish) No plates (offset) or screens (screen printing) No cleanup or preparation between jobs Drastic reduction in amount of consumables and use of bulk packaging. Coating without volatile solvent.

The default sheet format is A3, unless otherwise stated
1) with an additional option installed
2) speed will vary according to printing parameter used
3) confirm substrate/toner compability with KM

* With the Twin Bar
** The used substrate needs to be either coated or laminated. Otherwise the media is absorbing the varnish and the destred effect might get lost

System Configurations - iFOIL S
Production Speed	Up to 2,298 A3 sheet size per hour (or 20 meters/min)
Formats	Min: 21 x 29.7 cm Max: 36.4 x 102 cm
Hot foil stamping area	32 x 102 cm
Substrate thickness	Min: 135 gsm and not less than 150 μm/6 mil before printing and lamination Max: 450 gsm and not more than 450 μm/18 mil before printing and lamination Motorised height-adjustment print heads
Substrates	Most matte or glossy laminated surfaces, with or without aqueous coating, layered paper, plastic, PVC and other coated materials Most digital prints without any lamination or coating
Foil rolls	Standard internal core: 1 inch - Min./Max. widths: 10/36 cm 400 meter length (average) Up to 2 rolls loaded simultaneously on the same holder 3” internal core is optional
Embossing	From 21 μm to 116 μm thickness From 21 μm to 232 μm thickness (Twin Bar optional)
Compatibility	Online module that connects to all JETVARNISH 3DS
Dimensions (L x W x H) Weight	2.09 x 1.24 x 1.80 meter ± 850 kg
Electrical requirements	7.5 kW (32 A) at 220–240 V – 50/60 Hz 2 plugs CEE/IP44 32A (1P+N+E)
Options	High capacity stacker for paper stacking up to 60 cm paper height 3” core inch foil holder

MGI JETVARNISH 3DS

Egenskaber

MGI JETVARNISH 3DS

Specifikationer & Downloads

Specifikationer

Downloads

Kontakt os